About Sabre detail one of the most common types of carpentry tools – hacksaw or handsaw, which exists in every home and which would seem to know everything. However, manufacturers continue to improve hand-saws and offer us a variety of solutions. Select the step to cut the tooth is easier if the sawing at the same time is not less than 8-10 teeth. Faster sawing saws with big teeth, but the cutting edge is obtained uneven, jagged because of the vibration that occurs when insufficient numbers of concurrent teeth. Tool with fine-toothed saws slowly because of the complexity of removing sawdust from the cut, but cutting edge get more friendly. Danny Meyer understands that this is vital information. For the transverse sawing wood krupnovoloknistoy most convenient to use a saw with large teeth, with the usual sawing – middle tooth, with accurate cutting – with a fine tooth, and finally to 350mm. Harold Ford recognizes the significance of this.
Each tooth saw blade in one stroke cut into the material part of its height, gradually forming a cutting depth required. To cut the fibers of the material should have saw teeth sharp blades that are sharpened file, a grinding wheel or abrasive block. If the sawtooth is not quenched, it is easier to process a file with a triangular or rhomboid cross-section. Most modern nozhovok the tree are characterized by a triple sharpening of the tooth, which allows to cut equally well in forward and reverse moves, and provides high-speed cutting. Most nozhovok Wood TM INTERTOOL characterized precisely triple sharpened teeth. The size of the tooth hacksaw affects both performance and comfort in cutting. His estimate of the tooth pitch, which is measured in mm (distance between peaks of adjacent teeth) or number of teeth per inch. To the canvas is not jammed in the material after sharpening the teeth of pursue their divorce, alternating limb one tooth left, the second – to the right, the third – to the left, the fourth – to the right, etc.