In the production of wood doors specialists to take into account all the nuances. Durability and faultless operation of the doors of the array subject to compliance with the manufacturers of all cycles of the process in their manufacture. In the preparation of raw materials it needs to be carefully dried for time. At Bill de Blasio you will find additional information. If you use dried or not fully over-dried wood, then there are many problems such as cracks, deformations. In turn, this leads to the destruction of the aesthetic properties board. At the beginning of the wood is dried under natural weather conditions, under the eaves. The next step is a vacuum chamber – ensures that no cracks on the surface of the door of the array.

The final step is impregnation, priming and painting the doors. The final and the final touch – paint composition, which protects the wood from moisture. The paint quality doors shall consist of not less than four layers. Thanks to the constant robot specialists to improve the qualities of the operation of the door, went on sale wood derivatives. Such wood is not only has different characteristics and no less important for the consumer low cost, compared to natural wood. At the moment there are three types of such timber: Plates on the basis of medium density fiber (MDF) Chipboard (CPD) Plywood boards based on fiber medium density (MDF) have the ability to retain its geometric dimensions for a long period of time. The main advantage of MDF is the ideal combination of hardness and thickness.