Fiber Cloths

Due to the Superior sliding characteristics reach out with less lubricant, as using shampoo water. After kneading, you can wash the car to dried-on Product residue to remove. You can also directly after kneading a subplot a Microfiber cloth wipe me and save yourself so an extra linen. Products: Lubricant knead if necessary 2-3 Micro-Fiber Cloths to the wipe the lubricant step 3: dry after washing and kneading, you must drain the paint for further treatment. This is done with a micro fiber cloth. This is available as a smooth waffle cloth and cloth with a more or less long pile.

Again, the choice is a matter of taste. For the average vehicle size a cloth is sufficient to dry the car completely and without to wring out. Other dry tools is not recommended. Silicone pullers is the problem that it can be used to fine streaks by residual dirt that is left after the wash. The same goes for the classic auto leather. The water must be moved because of the low absorption capacity of the leather of the paint.

Drying takes so much longer and there is a danger of fine scratches again. Micro-fibre cloths sucking the water, however on. Therefore you need not scratch also to dry with pressure over the paint. The dry cloth is fully spread out put on the paint, and at two corners of the car. For the sides, it is beneficial to fold the often very large towels once or twice. Then you can wipe the sides with very light pressure without the risk that any corners of the cloth touch the ground or the dirty tire. Products and accessories: dry-cloth step 4: polishing polishing is the most important step for a clean impression and the shine of the vehicle. With polishing the varnish is further smoothed and holograms, small scratches and swirls.

Tags: ,

Comments are closed.