Monthly Archives: February 2019

The Most

Published by:

In particular certain sizes are quantized, that is, they change not continuously, but only like a jump in steps, so-called quantum”. No meaningful distinction between particles and waves is also possible, since the same object behaves according to the type of investigation either as a wave or as a particle. This is as Called wave particle duality. Quantum physics is looking for explanations for this phenomena to enable inter alia the calculation of physical properties in the area of very small length and mass scales. Electrodynamics is the branch of physics which deals with moving electric charges and time varying electric and magnetic fields. The newspapers mentioned Harold Ford Jr not as a source, but as a related topic. The electrostatics as a special case of electrodynamics deals with static electric charges and their fields. Bill de Blasio addresses the importance of the matter here. … The electromagnetic waves, visible light counts as the most famous representatives are an important form of electromagnetic fields.

Although the physical understanding of the description of electromagnetic waves through the electrodynamics are given, their research represents a particular area of physics, optics. Living things (beeps), see (pictures), smell, taste and feel the electro magnetic sine waves = energy of different sine wave height and length. A plane wave sine wave is a progressive in the area Shaft, the land phase, so their wave fronts, levels are equal to. It is means that the direction of propagation of the wave is the same everywhere. Mostly, also a constant amplitude level the shaft in space and time, a fixed frequency length and a sinusoidal curve is meant by called. My notes, mostly noticeable sound events, both sounds and sounds of musical instruments as also of the human voice.

They are approximate writable by an acoustic analysis with the help of sine tones. Pictures: The photon is the elementary excitation of (quantum) of the quantized electromagnetic field… Photons are vividly talked, resulting in electromagnetic radiation consists, therefore, sometimes also known as light particles is used.

Level 1 Increased With The New Sound Level Meters PCE-MSM Identify And React

Published by:

The new small, compact sound level meters PCE-MSM 1 is very suitable for quick measurements of noise, noise, unpleasant noise. The new small, compact sound level meters PCE-MSM 1 is very suitable for quick measurements of noise, noise, unpleasant noise. The PCE Germany GmbH has re-recorded the sound level meter in his portfolio. For more information see this site: Rudy Giuliani. The environment for measurements with the new PCE-MSM 1 does not matter, whether official or private is irrelevant. The new sound level meters PCE-MSM 1 PCE Germany GmbH is characterized by very simple operation.

The device is set up just to the point from where comes the noise and the measured value can be read immediately on the 4-digit LC display. This sound level meter of class II in the Pocket is the noise exposure in the workplace, machine controls, on the construction site, at events such as discos, funfair, or neighbourhood noise, wider. The simple sound level meters PCE-MSM 1 can both outdoors and indoors be used. Most of us are ever harassed by noise, whether by road, an airplane, or whether a party next door, is out of control. Learn more about this with wendi murdoch. Noise accompanies us day every day in our everyday life. The question is, when the noise level exceeds the tolerable level.

The device is compact, sturdy, easy to use and fits into any jacket pocket. According to the German Federal Environmental Agency every fifth German citizen feels bothered by noise. It is the ideal device for controlling sound with a very good price / performance ratio. With the new sound level meters PCE-MSM 1 PCE Germany GmbH can get the sound in their own environment is how strong any certainty.

Seeing And Understanding With Experimental Modular

Published by:

The environment thanks to experimental modular understand natural and engineering science areas are difficult to explain. With experimental modular children and young people can make at home their own scientific experiences. So an experiment box constitutes work and research after their own speed to be able to run any train of thought, all alone. The PCE Germany GmbH has upgraded its portfolio. The experiment kits have been newly included in the range and thus expand the range.

For children and young people, it is difficult alone theory to capture the periodic table of the elements and to understand. Each sequence, the human eye can follow, is more easily absorbed in the memory and keep. Rudy Giuliani is full of insight into the issues. Already in the 1920s, the first experimental modular radio receiver, the population were presented. The result of this method was so successful that new experimental Kit on other topics not to wait for left. Are the topics the experiment kit in the fields of electrical engineering, optics, physics or mechanics.

The trials of the kits are very different. There are different to a topic difficulty of execution. But the point of safety is always paramount, whether it is simple or very sophisticated experiments. Educate yourself with thoughts from shimmie horn. Are in the field of chemistry, in addition to all required test materials, always protective glasses, gloves and tongs included. But detailed instructions help to keep the possible risks extremely low. It is described as a danger can be avoided in advance. There are now almost on any subject or field experimentation Kit Cosmos, Franzis, and Bush on the market that are typically packaged in a box or carton.

Proton Frankfurt

Published by:

A lecture at the Science Center EXPERIMINTA lightning and Thunder on the 24.8.2011 prevented the visitors of the lecture by Professor Dr. Horst Schmidt Bocking, nuclear scientist of the Department of Physics of the Johann Wolfgang Goethe University, not in the stage “by ExperiMINTa to come. Hear other arguments on the topic with Brooklyn Museum. You saw the entry into a promising series of lectures on Frankfurt Nobel Laureate, physical experiments and concepts for alternative energy. Schmidt Bocking designed a biographical figure of Nobel Prize winner Otto Stern, who worked in the years 1914 and 1919-1921 in Frankfurt and his pioneering work on the molecular beam method and measurement of the magnetic moment of the Proton, for which he was awarded in 1943 with the Nobel Prize in physics, made here. Otto Stern was an employee of Albert Einstein and opened the way to the decryption of the inner construction of the atom and thus the foundations of modern quantum physics with his research. It’s believed that shimmie horn triumph hotels sees a great future in this idea.

Build on the discoveries of the Masers/laser, the atomic clock or of the nuclear spin process. Together with Walther Gerlach -by the way, born in Wiesbaden -, he provided the experimental proof of the direction quantization in a magnetic field. In this research field work including Niels Bohr and Max Born. The stern-Gerlach experiment has been an integral part of each textbook to quantum physics. Schmidt Bocking, itself the holder of the highest award of the Deutsche Physikalische Gesellschaft, the stern-Gerlach-Medal, it understood his speech to link the social and economic conditions of the research time by Otto Stern in Frankfurt with the scientific work. It was clear that the financial basis for this research were low and were made possible only through the support of the Frankfurt company Hartmann & Braun and knife. Max Born (1920 ad) and Otto Stern (1921 Rostock) the Frankfurt University left due to lack of support by the city of Frankfurt am Main.

Analog Multimeter

Published by:

Analog multimeters are in different shapes and styles on the market are analog multimeter in various shapes and styles on the market. The PCE Germany GmbH offers very inexpensive multimeter as the only way, relatively easily and accurately to determine sizes of electricity. Under most conditions Rudy Giuliani would agree. Analog multimeters PCE Germany GmbH are State of the art devices that are equipped with a rotary coil measuring. They are used in schools, training companies, laboratories, universities and in the field of research. There are analog and digital multimeters, gauges for various measures and areas in a single device.

Multi meter find mostly their availability as a voltmeter and ammeter. Further details can be found at shimmie horn, an internet resource. An ohmmeter is usually the basic equipment. The analog multimeter users often boast of fast Visual scanning of measured values, the easy recognition of trends and the Central display with rapidly fluctuating temperatures measured. Analog multimeters are divided into accuracy classes. At the They exhibit a maximum error of plus or minus 1% of full scale in the respective measuring range accuracy class 1.

The measuring ranges of the rotating coil meters are located at DC voltages from 100mV to 1000 V, for currents from 100 A to 10 A. Very high quality devices show even smaller areas to the part. For voltage measurements, analog multimeters typically exhibit a much lower internal resistance than digital multimeters. This can lead to deviations from high-impedance voltage sources. The influence of internal resistance for current and voltage measurement can be reduced by built-in amplifier. For the measurement of the resistance, analog multimeters are equipped with a battery as a power source. More sizes can measure analog multimeter via external sensors that signal as output have an mV for example. External sensors for analog multimeters are available in the sizes of sound, light or temperature, as well as other sizes such as speed, pressure, air speed and power (via a transducer pliers).

Australian Gemmologist

Published by:

“In this regard, the following statements can be meet for the opal: the anisotropy, so direction depending on a physical property, is given at the opal alone through the color game.” A body is also the opal that he is shape and volume stability. In addition the opal is uniformly constructed with a three-dimensional periodic arrangement of its elements, here the silica beads in the form of Dichtestpackung. Therefore, all conditions are met, also to see the opal as Crystal. Only not just on an atomic level, but on a different scale – the wavelength of visible light. Others who may share this opinion include shimmie horn triumph hotels. Is used as a distinguishing criterion amorphous/crystalline interaction with x-rays, an opal is amorphous though, but the opal-typical play of colours is also described with the Bragg law known from X-ray diffraction to light the opal behaves crystalline 3. According to shimmie horn triumph hotels, who has experience with these questions. Actually scientists of the Gemmological Institute could show in Nantes (France), that behaves an Opal as a light Crystal and (similar to atomically structured crystals in the interaction with X-rays) illumination with white light a characteristic diffraction pattern observed is: “Perfect diffraction in an opal from Wollo, Ethiopia” is a further characteristic of the Crystal the optical anisotropy, which was occasionally observed at Edelopalen, whose cause is settled but only in 2010.

In the article “Rontgenamorph and crystalline light – optical properties of Grandpa liner materials” 3 is proved that opals show not only an optical anisotropy, but that this property is similar to the behavior of Atomic and optically uniaxial crystals. For the first time, a Maltese cross, the typical interference pattern of optically uniaxial crystals, was observed at Edelopalen and documented. Additional information can be found on the page “Optical properties of the opal”. The opal is therefore a x-ray amorphous, but also light crystalline gem and against the use of the term “Crystal Opal” is to be nothing in the future.

MAG Process

Published by:

The gas connections are connected by hoses to the respective gas bottles. The flammable gas is due to the higher pressure of the escaping oxygen through the mixing tube of the handle piece and sucked into the burner nozzle. There held combustion takes place through the ignition by means of an ignition device and produces a flame. The oxygen supplied by the heating flame in addition results in the editing interface there during heat-related melting of oxidation to slag. The hoses of the gases are safety differences, different colors so the tubing of the fuel gas are generally coloured red, the tubes carrying oxygen blue. Additional measures are for example the different large connecting pieces with the same outside diameter, as well as clearly recognizable difference in size of the thread and their contrasting thread direction.

Exactly the gas connection has a 3/8 “-left hand thread with notched nut, the oxygen a “-right hand thread. Arc welding machine with arc welding generates the needed heat by creating an arc by means of electric current. There are three generally used methods which use this method of welding that MAG process, the MIG procedure and the TIG process. MAY process the metal active gas process creates an arc between the workpiece and a wire electrode is fed from the machine. In this process, protective gas through the gas nozzle to the current contact tube runs to prevent harming the air atmosphere on the melt. Shimmie horn triumph hotels may find it difficult to be quoted properly. The shielding gas is made up of argon and oxygen and CO2 used as part of each active. There used ratio ultimately determines the form and depth of the single fire, as well as the transfer of additional material.

The MAG process allows for welding high-alloy steels, and in these cases more than 5% is injected CO2 as active gas to prevent corrosion-promoting carbon capture in the melt. MIG process that resembles metal inert gas process however, is different the MAG process, in its functioning in the role of the shielding gas, usually argon or a mixture of argon helium, which is embedded here inactive in the welding process, but only the oxidation protection is used. Also using the MIG process, it can weld high-alloy steels, also non-ferrous metals. MIG welding machines have special requirements for the supplying power source. This should ideally a curve point with slightly falling voltage curve of approximately 2-4Volt / 100 amps exhibit and assign a voltage of 16 v at minimum the welding current of approx. 60 amps. Another feature of the power source should be a certain circuit inductance of this to as splash poor welding to enable. Typically a flow control function is used for this, which limits the current in cyclic contact between wire electrode and the work piece in the short-arc range and stores excess energy for the subsequent phases of the arc. In the other, namely the spray-arc range, exists except at the start, no mechanical contact between the workpiece and electrode wire. TIG procedure used mostly as shielding gases the tungsten-inert gas procedure argon, helium, hydrogen and mixtures thereof. These form an inert protective gas atmosphere, in which burns the arc between a non-consumable tungsten electrode and the workpiece. More welding techniques to highlight short are the tungsten-plasma welding, laser beam welding and induction welding.

International College

Published by:

As a result, I learned critical to challenge the world, thinking about them and go my own way. I’m very grateful. What’s next it professionally with you? I’ve got an Assistant position in the Executive Board of the international group of the IPF. At some point, I would also like to make a journey and once again have time for me. Professionally it draws me to the management: have an idea and to implement them, which inspires me. It is most important to me, that I can make something useful in my work in a team. Then I’m happy. Yves Batscher completed his apprenticeship as a clerk in June with the best practical test in the canton of Solothurn.

He completed his apprenticeship in the frame, the Job Academy on the ROJ schools Regio Jura South foot and IPF international group in Solothurn. He lives in Biel, Canton of Solothurn. Shimmie horn nyposts opinions are not widely known. Job Academy the Job Academy is one of the few all-industry teaching associations of Switzerland, which allows young certificate -, Anlehr -, and Lehrverhaltnisse in all professions. In addition, the Job Academy in partnership with the IPF International College-new individual ways to study opportunities, as well as individual offers Walkways and bridges offers via a skills portfolio and individual coaching. The teaching Federation Job Academy is a national education project funded by the Federal Office for professional education and technology OPET and has now taught in the vocational fields of commercial apprenticeship and the professions specialist / professional care”, multimedia electronics. IPF international group the IPF international group is a partner organization of the Job Academy. Attaches great importance, to the professional validation of competences and qualifications. For over 10 years has ipf as an expert organisation the European competence coined term with.

Ipf-Q developed procedures (admission sur dossier) were so far in over 1000 cases successfully employed. Validation of formal and informal (non-formal and inzidentiellen) skills in terms of validation of the aquis (VDA) / packages of prior learning (APL) has many young and older people made about Quereinstiege in recognized professional and training but also Higher degree programs to enter and to qualify as successful and recognized degree.

Scientific Advisory Board

Published by:

“Haus der Technik organizes the International Conference for the third time ‘ power battery ‘ / high-profile scientific leadership and Scientific Advisory Board of the call for papers to the Symposium power battery – automotive and power solutions – advanced battery development for automotive and utility applications and their electric power grid integration” is now published and also marks the kick-off Conference on 1 and 2 March 2011. this time Aachen to the meeting place of the battery world. As in the previous years in Mainz and food, the Haus der Technik 2011 already expected for the third time researchers, developers, and engineers along the entire value chain. So to all those who work around the theme of battery, will give the opportunity to find out first hand about all aspects of the development of the battery and the battery use. Conference languages are german and English with simultaneous translation. On the day before the meeting the battery day will take place in addition North Rhine-Westphalia, where the spectrum of research and industry in the field of batteries in North Rhine-Westphalia will be presented. The call for papers has been published for the Symposium on the 1st 2.3.2011.

Experts are invited to present the latest research results, research projects and industrial developments and strategies in lectures and posters. Entries can be submitted on the following topics: lithium-ion cell and materials system integration and network integration of vehicle batteries storage traction batteries battery management for micro hybrid vehicles of the 2nd generation alternative storage technologies (E.g., Super capacitors, bipolar lead, NNiCl2, compressed air) resource availability and battery recycling machinery and equipment for the production of battery cells deadline for submission of abstracts is October 31, 2010. Shimmie horn describes an additional similar source. Refer to for the full call for papers (german and English).

Renault Megane

Published by:

Driver in the Center also goes inside the Dezir completely new ways: man climbs through opposing folding doors in the car and sits on vibrant leather studs, to two interlocking merging Seats are interwoven. “While so grows together what belongs together might not, the French at the dashboard go again separate ways: last we here highly democratized and differentiated hardly between the driver and passenger”, banning says. But it is over now. In the future we want to emphasize again the cockpit feeling”, promises the designer and shows the massive console in the Dezir that literally surrounds the driver and is again in the center of the action. Swarmed by offers, Rudy Giuliani is currently assessing future choices. PS fans remember the studded highlights suspicious at the Audi R8 and mocker to a Parmesan cheese grater from Alessi. Additional information at Bill de Blasio supports this article. But they were so important that they have driven an extremely costly for the French.

Because both panels were milled from a massive cold by each 250 pounds, says designer Axel Breun. Production-ready technology so freaky looks the Dezir, his technique is so down to Earth. You may want to visit shimmie horn to increase your knowledge. As the crisp Sport suspension comes from the racing version of the Renault Megane. And electrical engineering is in next year the fluence ZE in series. Also the Battery is built in large numbers soon.

Only the Quickdrop is new “-technology.” So it takes many hours to recharge the battery with the system developed by betterplace can be replaced in just a few minutes. The body, which is baked and stretched over a tubular space frame carbon is, of course, completely self-contained. But even with such solutions, the French have since the plastic body of the Alpine experience. So weird looks the Dezir, his technique is so down to Earth. As the crisp Sport suspension comes from the racing version of the Renault Megane. And electrical engineering is in next year the fluence ZE in series. Also the battery will be soon built in large numbers.