The main carabiner at a glance snap hook can be versatile used and are needed in the budget, as well as at sporting events. Because the range of snap hook is so diverse, this article provides an overview of the main types and their fields of application. The normal carabiner is most commonly purchased and used. Here is a simple snap, which does not have a lock. The great advantage of this carbine is that you can quickly open and close and you can quickly insert. This carabiner used only, if the security is not too important. Generally, there are two different variations. One has a massive gate, while other models with a so-called wire gate are equipped.
The latter variant has the advantage that here no whip-lash effect can occur. If you peppy the carabiner with the back against a solid structure, that leads to a brief opening what may be undesirable depending on the application area. In General, these snap hooks are very cheap and available in large quantities. There is also the category of locking carabiner. When these hooks, the snapper was additionally equipped with a sleeve.
These can be either postponed or screwed and protects the carabiner from accidental opening. This carabiner used whenever, if security plays an important role, because the backup chain due to failure of a single carabiner would be interrupted. In this category, there are three different types of hooks: carabiner twist-lock connector safety Karabiner the carabiner has been attached a thread, which he compared to the normal carabiner somewhat safer from accidental move is. Several turns are required to open this model, so there is little chance, that the carabiner opening accidentally. This carabiner used whenever, if security should be a bit higher. The Twist-lock connector has a very long sleeve that can be opened by using a recess. The opening is on the outside of the carabiner and can be locked with a small spring.